MT-101 Telemetry module: This is the flagship product of MT series. The module can operate as an element of the control and data acquisition system with a central supervising.  The module provides optoisolated inputs/outputs: 8 binary inputs, 8 binary outputs (that can operate as inputs as well), and 2 analogue inputs 4-20 mA. The optoisolated serial port configurable to one of three standards: RS-232, RS-422 or RS-485, makes possible to use the module as a wireless communication gateway.

More>

MT-102 Telemetry module:This telemetry module has all advantages of MT-101 unit, but it is designed for applications which require higher number of analogue inputs. The MT-102 module has 6 analogue inputs 4-20 mA and 8 binary inputs/outputs. All other functions and parameters are the same as in the MT-101 model.

More>

MT-202 Telemetry module: MT-202 module has been designed for easy, wireless integration via GPRS network of various remote intelligent devices (e.g. PLC controllers, I/O stations, measuring devices, operator panels) equipped with serial port RS-232/422/485. MT-202 can be used as wireless, "transparent" serial port, but it can also play a role of a local Master querying periodically an external device for user defined resources (e.g. inputs, outputs, analog inputs, internal registers and flags).

More>

MT-703 Telemetry module: The MT-703 module is a battery powered, energy saving measuring and recording device which uses GPRS transmission. MT-703  provides 2 binary / counting inputs (designed for use with potential free contacts, e.g., with water counter), and 2 analogue inputs for the measurement of such parameters as pressure, temperature, level, etc.

More>

BaseNet: SensusBase is a fixed radio system which allows consumption meters for water, heat, electricity, gas and also EHCA (Electronic Heat Cost Allocator), to be read at any distance from a PC. This allows the operators to read their meters as often as they wish. BaseNet receive and store radio data from consumption meters. Automatic build-up of a radio network from up to 12 network nodes and up to 500 consumption meters.

More>

BaseGate: SensusBase is a fixed radio system which allows consumption meters for water, heat, electricity, gas and also EHCA (Electronic Heat Cost Allocator), to be read at any distance from a PC. This allows the operators to read their meters as often as they wish. Functionality as BaseNet with additional properties for remote read out via GSM, GPRS or Ethernet.

More>

SensusBaseP: The pulse module BaseP is part of the SensusBase system and processes the pulses of one or 2 meters with a pulse output. It transmits the data 6 times per day to the network node BaseNet or BaseGate via radio.

More>

SensusBaseR: The BaseR radio module is a component part of the SensusBase system. It is used in conjunction with the Apartment Water Meters in the Residia range, whose data are to be registered within the SensusBase system.

More>

Sensus HRI: HRI is an universal sensor, which is compatible with a wide range of meters, including single-jet, multi-jet and piston meters with dry-dial and semi-dry registers. The HRI is more than an extension of a simple sensor. It has been expanded to provide a reliable data source for remote reading of a conventional meter. It is the interface for all today’s requirements for data interrogation and remote transmission.

More>

Elster Pulser: Pulser or retrofitting at accepted domestic water meter and Woltmann meter. Quick connection, astoundingly simple, reliable and secure. And you don’t have to interrupt the water supply or break the calibration seal.

More>

Falcon PR6/PR7: Highly robust Elster’s PR6 and PR7 solid state pulsers form the bases of an ultra reliable Automatic Meter Reading (AMR) system.

More>

M-Bus Central Unit: M-Bus Central Unit independently records and manages all measured data in a M-Bus installation. Times and intervals for automatic read-out are defined practically at will. The permanently stored data can be read at any time locally with a PC. Also it is possible to receive data from the M-Bus Central Unit at almost any location by an optional GSM/GPRS external modem. The exported data format is suitable for processing with standard databases and table calculations.

More>

PW60 M-Bus Level Converter: These master level converter offers 60 M-Bus slaves. These devices are ideal for custom and economical M-Bus installations. All measured data can be recorded and processed by a connected computer system with suitable software. The PW60 allows to setup parameters and read data from slaves on-site by a mobile computer. It is also possible to transmit data from the M-Bus installation by the GSM/GPRS network, using GSM/GPRS modem.

More>

PW20 M-Bus Level Converter: These master level converter offers 20 M-Bus slaves. These devices are ideal for custom and economical M-Bus installations. All measured data can be recorded and processed by a connected computer system with suitable software. The PW20 allows to setup parameters and read data from slaves on-site by a mobile computer. It is also possible to transmit data from the M-Bus installation by the GSM/GPRS network, using GSM/GPRS modem.

More>

M-Bus PadPuls M1: The PadPuls M1 devices connects meters with contact output to the M-Bus system. This is a simple and flexible solution for reading already installed counters and measuring meters for electricity, gas, oil, water and heat. During installation the PadPuls M1 can easily be adapted to the pulse output of the meter. The power for the impulse adaptor is taken from the M-Bus. An integrated battery maintains the count function in case of a bus voltage failure.

More>

M-Bus PadPuls M1C: The PadPuls M1C devices connects meters with contact output to the M-Bus system. This is a simple and flexible solution for reading already installed counters and measuring meters for electricity, gas, oil, water and heat. During installation the PadPuls M1C can easily be adapted to the pulse output of the meter. The power for the impulse adaptor is taken from the M-Bus. An integrated battery maintains the count function in case of a bus voltage failure.

More>

M-Bus PadPuls M2: The devices of the PadPuls M2 series adapt up to two conventional meters with pulse output to a M-Bus system. Optionally the user can activate a tariff function, by which energy or volume pulses can be accumulated in separate meter readings for primary and secondary tariffs. The integrated battery ensures that the impulse adaptor is fully operable, even if the M-Bus network fails. Additional security is provided by the periodic saving of the meter readings in non-volatile memory.

More>

M-Bus PadPuls M4: The PadPuls M4 makes up to four conventional meters with pulse output M-Bus compatible in an easy manner. So the PadPuls M4 combines four M-Bus impulse adaptors in a single unit. The built-in battery ensures that it is fully operable even if the M-Bus network fails. Additional security is provided by the periodic saving of the meter readings in non-volatile memory. By these features and the integrated display the PadPuls M4 can also be operated as a M-Bus independent remote display.

More>

RT: Wi5 Data Concentrator: The RT:Wi5 is the Radio-Tech’s central data collection device. It has a memory of 2GB and can single-handedly manage hundreds of Radio-Tech transmitters. The RT:Wi5 series offers versions for UHF (433 or 869 MHz) or VHF (153 or 169 MHz) radio frequency and for Ethernet, Wi-Fi or GPRS options. Additional options is Permalog RT:Wi5 version, for collection leakage data from Palmer's Permalog+ sensors/loggers.

More>

Universal AMR Receiver: The Universal AMR receiver has been designed to provide a complete solution for either fixed or mobile data collection. This receiver can be used with all Radio-Tech applications to read logging devices and compile data to your laptop.

More>

USB Receiver: The USB Receiver can be used with all Radio-Tech applications to read logging devices and compile data to your laptop. It requires no external power supply as it is driven by USB. This receiver is perfect for collecting information on the go as it is a lightweight and compact device with a self install capability.

More>

Ecoboost repeater: Ecoboost is an intelligent repeater station used to re-transmit messages received from ecochirp transmitters, extending their operational range. The ecoboost is used to maximise ranges and therefore minimise the amount of equipment needed. This is ideal for larger sites as it keeps the cost down without reducing the quality of the system.

More>

Booster: The Radio-Tech Booster has the capabilities of increasing signal range from 100m to 2.5km. This is an ideal tool in locations where signal range is limited. The Booster can be installed into existing infrastructures. The Booster converts the radio frequency from 869 to either 153 or 169 to improve the signal range. This is a cheaper alternative to using all high powered radio transmitters such as ecochirps.

More>

Ecochirp transmitter: The market leading ecochirp counts pulses from any pulsed output including electricity, water and gas meters. Once installed, the ecochirp counts pulses accumulatively. At periodic intervals, the ecochirp then sends the total count via radio to the RTWi5 Data Concentrator or other Radio-Tech receiver.

More>

Samsung DID - Digital Information Displays: Samsung is the worldwide no. 1 of TFT manufacturers and in this field provides first-class screen quality combined with top features, some of which are unique on the TFT market. Samsung offers TFT displays from small to large sized (52.0”, 55.0”, 70.0” i 82.0”), suitable for a wide range of different applications varying from industrial to entertainment use.

More>

Prisma II: RGB converter board - analogue control:System solutions with the RGB converter board "PRISMA" include all components for building up a complete TFT display monitor. PrismaII is a RGB/Video Converter board optimised for industrial and multimedia applications. It provides state-of-the-art features and a wide range of special functionalities and characteristics.

More>